10 Pack Fire Rated Riser Door from Both Sides -Smoke seals - MULTI PACK DISCOUNT
Fire Rated Riser Door with smoke seals
Discounted Pack of 10
Our new 10 pack of TAP51 Range of bespoke Fire Rated Riser Doors are not only Fire Tested up to 2-hours from both the face and the rear of the panel to ensure the spread of fire is contained on either side of the door but are also Smoke Sealed as standard.
Please make sure that the Structural Opening Size (hole in the wall into which the panel is to be installed) is at least 7mm larger than the panel size, back of frame size (e.g. 900x600mm panel size requires a 907x607mm hole size).
All of our Riser Doors are manufactured here in the UK and are fitted with a three-point locking system which is operated by way of a 3-way lock other locking options are available upon request.
Our Riser Doors have been specially designed, and fire tested specifically for use in riser shafts running through multi-storey buildings to help prevent fire escaping from and into riser shafts.
Our Riser Doors are powder-coated in RAL9010 as standard with the ability to be finished in almost any RAL colour as required alongside the option of dust-primed for on-site decoration if preferred.
Please Note: in line with the Fire Test Certification, when installing this range of Riser Door, you must apply Intumescent Acrylic Mastic to both faces of the frame, nominally 5mm wide, sealing to the supporting construction.
This Wall Access Panel (Riser Door) has been manufactured to be 2 hour Fire rated from both sides and is supplied with the Rapid Fit Hinge System. The panel comprises of a 1.2mm Thick Door Leaf, 1.5mm Thick Frame, a Metal Faced Door and 25mm wide Picture Frame (other picture frame sizes available upon request alongside beaded frame). The panel is supplied with 3 Point Locking System (other locking options available upon request) and is available as a Single Door Unit which is both Fire and Smoke Tested.
As standard, the panel would arrive Powder Coated RAL 9010 30% Gloss (other RAL colour options available upon request).
The 1st dimension stated is the hinge side.
This particular panel specification has a Fire Test Certificate up to 2400x900mm from the front and rear in a Wall application covered by Fire Certificate Number 503796 tested in accordance with BSEN 1634-1: 2014 + A1:2018. Anything above these sizes will be manufactured to the same construction as tested. This Panel is Smoke tested covered by Certificate Number WYC504480 tested in accordance with BS EN1634-3: 2004.
The Panel is 2 Hour Fire Rated for integrity from both sides up to 2400X900mm in a wall application tested in accordance with BS EN 1634-1:2014+A1:2018
The Panel is Smoke tested in accordance with BS EN 1634-3: 2004.
The panel benefits from the below Seals as standard:
- Draught Seals
- Smoke Seals
- Intumescent Seals
The TAP51-120S-MD-PF-3WL range of panels are manufactured from Zintec Steel with a 1.2mm thick Door and a 1.5mm Frame. The panels door leaf is hinged by a Fast Fit Hinge System which saves time on fitting compared to a Full Piano Hinge system.